Rode RODELink Filmmaker Kit Digital Wireless System for Filmmakers

25,147.00

The Rode RØDELink Filmmaker Kit brings vloggers, DIY videographers, and content creators a cost-effective digital wireless microphone system

  

[lwptoc]

Rode RØDELink Filmmaker Kit

The Rode RØDELink represents the next generation of digital wireless systems. Using a Series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards). The Rode RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone.

The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8″ thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions.

The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDE has included an omnidirectional lavalier microphone in the kit to provide the highest possible audio reproduction quality.

Rode RØDELink Filmmaker KitRode RØDELink Filmmaker KitRode RØDELink Filmmaker KitRode RØDELink Filmmaker Kit

Rode RØDELink Filmmaker Kit Key Feature

  • Series II, 2.4GHz digital transmission
  • 128-bit encryption
  • Up to 100 metres range*
  • OLED display (on receiver)
  • One button pairing
  • Three level gain control
  • AA battery or USB powered
  • Includes broadcast lavalier microphone

RØDELINK FILMMAKER KIT SPECIFICATIONS

Transmission type 2.4GHz Fixed Frequency Agile System
System dynamic range 112dB
Range (distance) Up To 100m
Frequency range 35Hz – 22kHz
Maximum output level 1v Rms (2.8v P-p)
Max input signal level 1v Rms (2.8v P-p)
Max latency 4ms

RECEIVER (RX-CAM)

Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Output connection 3.5mm TRS Locking Jack Socket – Dual Mono
Output impedance 300Ω
Dimensions 111mm X 65mm X 52mm
Weight 190gm

TRANSMITTER (TX-BELT)

Power source 2 X AA Battery Or MicroUSB
Antenna Internal
Input connection 3.5mm TRS Locking Jack Socket
Input impedance 10kΩ
Dimensions 111mm X 65mm X 40mm
Weight 190gm

RØDELINK LAV

ACOUSTIC & ELECTRICAL SPECIFICATIONS

Acoustic Principle Permanently Polarised Condenser
Polar Pattern Omni-directional
Output Impedance 3k Ω Typical
Frequency Range 20Hz – 20kHz
Maximum SPL 110 dB SPL (@ 1kHz, 1% THD into 1Ω load)
Sensitivity -33.5db re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2dB @ 1kHz
Signal to noise Ratio 67 dB
Equivalent Noise (A-weighted) 27 dB Typical
Dynamic Range 83 dB Typical

MECHANICAL SPECIFICATIONS

Dimensions 1200.00mmH x 4.50mmW x 4.50mmD

SUPPORT

download icon 1

RØDELink Filmmaker Kit
Firmware Updater (Mac)

download icon 1

RØDELink Filmmaker Kit
Firmware Updater (Win)

download icon 1

RØDELink Filmmaker Kit
Quickstart Guide

COMPATIBLE ACCESSORIES

There are no reviews yet.

Be the first to review “Rode RODELink Filmmaker Kit Digital Wireless System for Filmmakers”

Your email address will not be published. Required fields are marked *

SKU: RODELink Filmmaker Kit Categories: , , ,
Updating…
  • No products in the cart.